PA12 MATERIAL PROPERTIES
This data is for Duraform PA12 printed on ProX 6100 machinery. The properties may vary depending on part geometry and print orientation, therefore the values are a good guideline but can not be guaranteed.
DENSITY (g/cm3)
0.95
HARDNESS (SHORE D)
73
TENSILE STRENGTH (MPa)
50
TENSILE MODULUS (MPa)
1770
ELONGATION at YIELD (%)
14
ELONGATION at BREAK (%)
22
FLEXURAL STRENGTH (MPa)
60
FLEXURAL MODULUS (MPa)
1650
IMPACT STRENGTH NOTCHED IZOD (j/m)
45
IMPACT STRENGTH UNNOTCHED IZOD (j/m)
644
HEAT DEFLECTION @ 0.45MPa (C)
182
HEAT DEFLECTION @ 1.82MPa (C)
97